You will need
Plain white plates
Rust-Oleum Metallic Leafing Pen in Gold
Decorators tape or masking tape
Large foil tray or old roller tray (check your object fits in flat)
Rust-Oleum Universal All-Surface paint in colours of your choice
1. Cover the back of your plates with decorators tape and carefully cut around the edge, making sure its stuck all the way round after cutting. As I wanted to try lots of different colours I lined my tray with clingfilm, meaning I could get rid of each colour as I went but actually the paint just skims off the top between each attempt if its left for a short while.
2. Pour enough lukewarm water into the tray to make sure you can dip the plate in fully. The warmer water helps the paint to spread slightly. Use a skewer to drizzle some paint into the water rather than pouring from the tin, you don’t want too much as it will be too thick for the plate, you need a nice thin coating. The paint should spread a little giving a cloudy feel. If you want to use a two colour effect, put your second colour on top, then use the skewer to create a pattern on top.
3. You’ll need protective gloves for this part.
I found that the second dip of the effect was often the best so I tested it first with polystyrene plates but you could use paper plates. It really is about experimenting though. The first dip had lots of colour and the second dip was a much more muted marble effect.
Dip your plate in the solution trying to keep your fingers away from the edge (you get different effects if you dip upside down too). I tried one with blue and yellow and it created a beautiful deep green pattern. So have a play and enjoy experimenting!
Tip 1: If you can see water through the paint, you’ll still see the plate through the effect.
Tip 2: As they dry, dab off the excess water drops with kitchen roll otherwise you’ll get bubbles. You’re able to do this quite soon after dipping them, if the paint is thin enough it will stick to the plate almost instantly.
4. Once you’re happy with your plates, leave them to dry for at least 3-4 hours, then remove the tape from the back and carefully draw a gold line around the edge with the Rust-Oleum Metallic Leafing Pen in Gold for a gilded edge effect.
Please note - these bowls are for decorative use only and must be hand-washed.