In a matter of hours you could transform an array of seats and benches into cute and whimsical festive furniture — even better if they are easy to stack away and store for next year!
You will need
Rust-Oleum Surface Primer
Dust sheets or newspaper
Rust-Olueum Painter’s Touch – White Satin
Rust-Olueum Painter’s Touch – Cherry Red Gloss
An artist blade or sharp scissors
Rust-Oleum Low Tack Adhesive
Rust-Oleum Crystal Clear
1. Start by sanding down a wooden chair and giving it a wipe over with a damp cloth to remove any dust, dirt or grease. Allow to dry thoroughly before starting to paint.
2. Use Rust-Oleum Surface Primer in white to cover the entire chair with a layer of primer. This will make it easier for the paint to adhere to the wooden surface. Allow to dry thoroughly.
3. Choose a base colour for your chair. This chair is white with red, but you could paint it any combination of festive colours including green, burgundy or metallic tones. We used Rust-Olueum Painter’s Touch spray paint in satin white and gave the chair two coats of spray paint for an even finish, allowing the paint to dry thoroughly between layers.
4. Cover the entire chair with newspaper, bin bags or dust sheets, leaving only the seat exposed. Spray paint the seat with two fine coats of spray paint to create a contrast. We used Rust-Oleum Painter’s Touch in Cherry Red. Allow to dry thoroughly between layers.
5. Use thick low-tack masking tape to create a candy cane stripe around the legs of the chair. Start at the top of each leg and wind the masking tape around the leg, smoothing out as you go.
6. Mask off the rest of the chair using newspaper, bin bags or a dust sheet, leaving only the legs exposed. Paint the legs in a contrasting colour, using two fine coats of the spray paint.
7. Allow to dry completely before carefully removing the masking tape to uncover the candy cane striped pattern on the legs.
8. To add a festive pattern to the seat of the chair, create a snowflake stencil using greaseproof paper. Fold the paper into a triangle and draw on a snowflake design in pencil. Cut out the middle of the snowflake shape.
9. Brush a thin coat of Rust-Oleum Low Tack Adhesive over the stencil and leave it to dry a little and become tacky before carefully applying to the seat.
10. Mask off any other parts of the chair that you don’t want to be painted and spray paint the stencil with white paint.
11. Allow to dry thoroughly before peeling away the stencil to reveal the snowflake design. If any low tack adhesive remains on the chair, carefully peel it off. Spray the entire chair with a coat of Rust-Oleum Crystal Clear protective coat to seal.
Tutorial courtesy of Rust-Oleum